Type umount /dev/sd x1 (replacing x with your drive letter).Ĭ.Type w to write the new partition information to the USB key.Press enter again to accept the default last sector.Next press enter to accept the default first sector.Type 1 to make this the first partition then press enter.Then type p to make this partition primary then press enter.Next we need to create the new partition. (fdisk should automatically select the second partition).ī. Then type d to proceed to delete another partition, if necessary.Type 1 to select the 1st partition then press enter.Next type d to proceed to delete a partition.Then type fdisk /dev/sd x (replacing x with your drive letter).Type fdisk -l and note your USB drive letter.Open a terminal ctrl+alt+t and type sudo su.First we need to delete the old partitions that remain on the USB key. The following manual tasks to restore a USB drive can be performed from a Linux terminal window.Ī. Restoring a USB key to its original state using Linux Restore a USB Flash Drive from Windows, Linux, or Mac OS As shown in the related the Linux Flash Drive Restoration tutorial. For those working from Linux this task can easily be accomplished via fdisk. Mac OS users should also be able to use the SD tool. Windows users can follow the instructions below to Repair or Restore a Flash Drive using Diskpart, BOOTICE, or the SD Formatter. As a result, the existing boot record, partition table data, and filesystem is overwritten with that of the raw image file. This is because these tools use raw-write style dd tasks to put an. In some cases, the flash drive might not be assigned a drive letter and the USB not detected by your Computer. Depending on the file used, these tools can make your USB device appear corrupted or unreadable. You might find it necessary to restore a USB after working with tools such as Etcher to burn an ISO or Win32 Disk Imager to write an image. This allows the Reset USB drive to be detected, readable, and useable again by all computers. Essentially resetting or restoring the USB flash drive back to its original state. But this step can be skipped if you intend to use the USB stick with only generic PC hardware.How do I restore a USB flash drive back to its original state? Or how can I reset a USB drive to factory settings? After having tooled around with a USB Linux version using your dd raw image overwritten or multi partitioned flash drive, you might find it necessary to revert back to a single Fat, Fat32, exFAT or NTFS partition. To ensure maximum compatibility with Apple hardware, we’re going to first blank and reformat the USB stick using Apple’s ‘Disk Utility’. An Apple computer or laptop running macOS.This is because Apple’s ‘Startup Manager’, summoned by holding the Option/alt (⌥) key when booting, won’t detect the USB stick without a specific partition table and layout. There are a few additional considerations when booting the USB stick on Apple hardware. We’re going to cover the process in the next few steps. Use tools installed by default on the USB stick to repair or fix a broken configurationĬreating a bootable USB stick is very simple, especially if you’re going to use the USB stick with a generic Windows or Linux PC.Boot into Ubuntu on a borrowed machine or from an internet cafe. Test out the Ubuntu desktop experience without touching your PC configuration.Install or upgrade Ubuntu, even on a Mac.With a bootable Ubuntu USB stick, you can:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |